3DOM

3Dom – Free Datalogger Oriented Manager. This software manages instrument configurations and data storage.

Version 3.32.0.0 released on February 08, 2024 upgradable from version 3.0.0.0

  • Added support for Alpha_Log 2.8;
  • Added support for the new Logical Input Logical State for Alpha_Log 2.8 devices;
  • Added new calculated measures for Alpha_Log 2.8 devices;
  • Added data vaidation precedures for Alpha_Log 2.8 devices;
  • Includes version 2.4.25 of the configuration library.

Version 3.31.0.0 released on Semptember 06, 2023 upgradable from version 3.0.0.0

  • Added support for the new Logical Input SDI-12 for Alpha_Log devices;
  • Added communication statistics for WiFi, VPN and PPP for Alpha_Log devices;
  • Addde remote restart options for Alpha_Log devices;
  • Added confirmation request for updating local communication parameters when downloading a device configuration;
  • Includes version 2.4.25 of the configuration library.

Version 3.30.0.0 released on February 03, 2022 upgradable from version 3.0.0.0

  • Added support for version 2.6 of Alpha-Log;
  • Updated the tool for searching the network of Alpha-Log devices;
  • Fix the Send/Receive buttons in the Configuration toolbar;
  • Includes version 2.4.13 of the configuration library.

Version 3.29.1.0 released on December 09, 2021 upgradable from version 3.0.0.0

  • Solved a problem with the configuration of LSI LASTEM CLOUD.

Version 3.29.0.0 released on November 11, 2021 upgradable from version 3.0.0.0

  • Alpha-Log device: added the possibility to load the configuration of a device already inserted in 3DOM from the USB key downloaded from the device;
  • Alpha-Log device: added support for sending SMS in AlwaysOn mode for devices with firmware 2.0 or higher;
  • Alpha-Log device: improved the management of the closing of the configuration scripts of the device which, in some cases due to the loss of the connection, reported errors despite having successfully concluded the execution;
  • The texts of the Zigbee radio for serial 2 have been modified by adding the associated default value to the PAN to avoid input errors;
  • Fixed checking of the format of IP addresses.

Download

LSI WEB INSTALLER
MICROSOFT. NET 3.5
LSI SUPPORT CENTER SETUP

Upgrades History

To verify the upgrades of each LSI LASTEM program, select the following list:

Version 3.28.0.0 released on September 22, 2021 upgradable from version 3.0.0.0

  • Added support for Version 2.45.2 of E-Log;
  • Added possibility to send SMS even with power supply always on for Pluvi-ONE 2.5;
  • Improved the management of the polinomial coefficients with scientific notation for Alpha-Log and Pluvi-ONE;
  • Updated the configuration report template with the indication of the color codes of the new cable for E/R/M-Log and ALIEM;
  • Fixed some texts in the help windows.

Version 3.27.0.0 released on July 29, 2021 upgradable from version 3.0.0.0

  • Added support for Version 2.5 of Alpha-Log;
  • Alpha-Log: fixed the management of the name of the site and / or of the station in the registry which can now be removed after having entered them and saved the configuration.

Version 3.26.0.0 released on July 14, 2021 upgradable from version 3.0.0.0

  • Completed support for version 2.4 of Alpha-Log included management of Pasquill-Gifford module and gravimetric material moisture calculation.

Version 3.25.0.0 released on June 16, 2021 upgradable from version 3.0.0.0

  • Added support for version 2.4 of Alpha-Log;
  • Modified format of the statistic dates of the Alpha-Log and Pluvi-One instruments to also display seconds.

Version 3.24.0.0 released on January 18, 2021 upgradable from version 3.0.0.0

  • Added Alpha-Log and Pluvi-ONE vers. 2.1 device support;
  • Added E-Log vers. 2.5 and Alien vers. 1.1 device support.

Version 3.23.0.0 released on November 18, 2020 upgradable from version 3.0.0.0

  • Fixed the problem of updating the sensor library;
  • Added Alpha-Log 2.1 device support.

Version 3.22.0.0 released on August 6, 2020 09:40:59 upgradable from version 3.0.0.0

  • Added Pluvi-ONE support for export options and alternative datalogger identification;
  • Added support to Alpha-Log and Pluvi-One configured with export options and alternative ID;
  • Correct visualization of elaborations in Pluvi-ONE and assignment of new properties in Aliem.

Version 3.21.0.0 released on June 22, 2020 19:22:03 upgradable from version 2.0.0.0

  • Added Alpha-Log 2.0 and Pluvi-ONE 2.0 device support;
  • Updated R / M-Log with new calculated measure for the Estimated Natural Decay of SARS-CoV-2 on surfaces;
  • Improved management of sensor library updates.

Version 3.20.0.0 released on November 25, 2019 16:15:17 upgradable from version 3.0.0.0

  • Includes support for version 1.2 of AlphaLog;
  • Includes version 2.4.2 of the configuration library;
  • Fixed some texts in help messages.

Version 3.19.2.0 released on October 2, 2019 11:19:01 upgradable from version 3.0.0.0

  • Updated the management of the Alpha-Log measures associated with the input types Modbus and Tipping Bucket Rain Gauge;
  • Includes version 2.4.2 of the configuration library;
  • Alpha-Log, Pluvi-ONE: minor corrections.

Version 3.19.1.0 released on August 1, 2019 14:18:48 upgradable from version 3.0.0.0

  • Alpha-Log: inserted function for importing the measures configured in ALIEM device;
  • E-Log, M/R-Log: correct misalignment measures after Report view;
  • Alpha-Log, Pluvi-ONE: minor corrections.

Version 3.19.0.0 released on June 27, 2019 14:31:28 upgradable from version 3.0.0.0

  • Includes support to new datalogger Alpha-Log e Aliem;
  • Includes version 2.4.0 of the configuration library.

Version 3.18.4.1 released on July 18, 2018 10:05:33 upgradable from version 3.0.0.0

  • Fixed the problem of updating the sensor library reported on some installations.

Version 3.18.4.0 released on July 4, 2018 09:41:05 upgradable from version 3.0.0.0

  • Includes version 2.3.52 of the configuration library;
  • Modify the options to generate the name of the file created by the text writer by adding the possibility to add the data configuration date.

Version 3.18.3.0 released on June 6, 2018 14:45:20 upgradable from version 3.0.0.0

  • Fixed the management of library sensors containing calculated measures for Pluvi-ONE instruments;
  • Supports version 2.3.52 of the configuration library.

Version 3.18.2.0 released on May 17, 2018 16:02:03 upgradable from version 3.0.0.0

  • Improved the filter of the configuration date on download of the processed data;
  • Fixed an error on the copy of the measure for the Pluvi-ONE.

Version 3.18.1.0 released on March 26, 2018 10:00:54 upgradable from version 3.0.0.0

  • Added support for downloading and saving elaborated data generated by Pluvi-ONE instruments.

Version 3.18.0.0 released on February 8, 2018 14:17:49 upgradable from version 3.0.0.0

  • Add suport to Pluvi-ONE instrument;
  • Supports version 2.3.51 of the configuration library.

Version 3.16.0.0 released on July 20, 2016 17:47:39 upgradable from version 1.0.0.0

  • Fixed some texts;
  • Supports version 2.3.40 of the configuration library;
  • Added the new data storage FTPXLogFile to submit to an area FTP data formatted according to the track of the XLog instrument;
  • Calculated measures: added the possibility to change the update rate of the calculated measure “Reprocess measure”;
  • Fixed assignment of the channel value for certain Modbus sensors that allow values greater or equal to 255.

Version 3.15.0.0 released on July 29, 2015 11:06:42 upgradable from version 3.0.0.0

  • Fixed an issue with changing the date of the instrument configuration when you change the data structure. It applies to instruments of class R/M/S-Log;
  • Fixed some texts;
  • Supports version 2.3.36 of the configuration library.

Version 3.14.1.1 released on July 20, 2015 12:13:28 upgradable from version 3.0.0.0

  • Changed the Instrument Manager program used by GidasTEA to report the correct procedure to be used to download data from HeatShield instruments;
  • Supports version 2.3.36 of the configuration library.

Version 3.14.1.0 released on June 3, 2015 10:28:34 upgradable from version 3.0.0.0

  • Supports version 2.3.36 of the configuration library;
  • Added support to Boschung protocol for E-Log v2.41.

Version 3.14.0.0 released on April 9, 2015 15:46:30 upgradable from version 3.0.0.0

  • Supports version 2.3.35 of the configuration library;
  • Added support to data storage service on LSI LASTEM’s FTP site.

Version 3.13.2.0 released on January 29, 2015 15:26:38 upgradable from version 3.0.0.0

  • This version adds the option to configure the text writer using two digits to save year information.

Version 3.13.1.0 released on November 26, 2014 14:34:48 upgradable from version 3.0.0.0

  • Fixed an issue that prevented the download of the configuration of R / M-Log instrument with multiple channels in SingleEnded mode.

Version 3.13.0.0 released on November 3, 2014 16:18:44 upgradable from version 3.0.0.0

  • Supports version 2.3.30 of the configuration library;
  • Changed the configuration of the file name used to save the data to a text file to make it more flexible and allow for saving a file every the day when in append mode;
  • Changed the program to manage datalogger used by the program GidasTEA: You can now configure the datalogger for microclimate calculations using the property of auto-configuration allowed by the LSI M-Log 009 datalogger.

Version 3.12.8.0 released on June 30, 2014 15:11:08 upgradable from version 3.0.0.0

  • Supports version 2.3.26 of the configuration library;
  • Added support for Elog 2.38 (added protocols ModBusMaster with data request command) and Rlog 1.18 (added protocol ModBusMaster with data request command).

Version 3.12.7.0 released on June 12, 2014 10:34:38 upgradable from version 3.0.0.0

  • Added support for Elog 2.38 (added protocols ModBusMaster and Komoline) and Rlog 1.18 (added protocol ModBusMaster);
  • Fixed some minor bugs;
  • Supports version 2.3.25 of the configuration library.

Version 3.12.6.0 released on April 28, 2014 09:20:01 upgradable from version 1.0.0.0

  • Added support to anemometer ESV306/7;
  • Supports version 2.3.34 of the configuration library.

Version 3.12.5.0 released on March 26, 2014 09:38:21 upgradable from version 3.0.0.0

  • Added the support to the double units for the inclusion of the calibration factors of the radiometers (mV/Wm2 and uV/Wm2);
  • Fixed bug that occurs when you send a configuration to an E_Log of version 2.30 or higher that contains an Access Point Name longer than 15 characters;
  • Supports version 2.3.23 of the configuration library.

Version 3.12.4.0 released on January 20, 2014 11:38:55 upgradable from version 3.0.0.0

  • Fixed a communication problem during the sending of a configuration to an instrument that signals failure on the radio connection;
  • Supports version 2.3.22 of the configuration library;
  • Added support for the Modbus Master protocol.

Version 3.12.3.0 released on December 17, 2013 09:03:52 upgradable from version 3.0.0.0

  • Fixed the configuration verification when using the BIRAL protocol that incorrectly showed the message ‘This configuration contains serial measures, but serial port two protocol has not been well configured’;
  • Supports version 2.3.20 of the configuration library;
  • Fixed the window of instantaneous data to indicate the sensor network address for LUFFT sensor;
  • Fixed some texts.

Version 3.12.2.0 released on November 6, 2013 10:39:28 upgradable from version 3.0.0.0

  • Supports version 2.3.19 of the configuration library;
  • Changes the control of the minimal elaboration rate with serial sensors Lufft.

Version 3.12.1.0 released on October 22, 2013 17:25:57 upgradable from version 3.0.0.0

  • Supports version 2.3.19 of the configuration library;
  • Corrects a communications failure with instruments of class R-Comm introduced by the previous version.

Version 3.12.0.0 released on October 7, 2013 14:20:15 upgradable from version 3.0.0.0

  • Supports version 2.3.19 of the configuration library;
  • Added support to the communication protocol of the sensors LUFFT for E-Log with firmware version 2:35 or higher and for M-Log with firmware version 2-14 or higher;
  • Improved support for the instrument configurations export function between computers with different time zones or daylight saving different management. Before this fix the export function could cause configuration mismatch;
  • Adding the reporting of days of storage available depending on the configuration for memory cards of 8 MB.

Version 3.11.0.0 released on August 26, 2013 09:38:56 upgradable from version 3.0.0.0

  • Supports version 2.3.18 of the configuration library;
  • Added support for E-Log 2.34 (supports Biral protocol);
  • Added support for R-Log ELO011;
  • Fixed the display of the toolbar in the main window that would not show the last buttons when the screen uses the characters medium or large.

Version 3.10.5.0 released on March 25, 2013 10:11:16 upgradable from version 3.0.0.0

  • It was added an automatic check for library updates that no longer requires the full update of the program;
  • Configuration Report: it was added the description of color and resistance to the terminals of the single-ended sensors;
  • Supports version 2.3.16 of the configuration library;
  • E-LOG: it was corrected the terminal assignment for single-ended sensors on input 3.

Version 3.10.4.1 released on March 6, 2013 11:41:06 upgradable from version 3.0.0.0

  • Supports version 2.3.15 of the configuration library;
  • Install GidasLite 1.0.1.0;
  • Added display of speed related to the wind direction as calculated measure in the panel of the measures.

Version 3.10.4.0 released on January 21, 2013 12:27:46 upgradable from version 3.0.0.0

  • Contains the first version of the program GidasLite the abridged version of LSI LASTEM programs for data handling and download of LSI LASTEM E-Log, R-Log and M-Log acquisition instruments and for the simplified handling of the major microclimate calculations;
  • Supports version 2.3.14 of the configuration library;
  • Added the complete online user guide of instrumetns E-Log, R-Log, M-Log, S-Log.

Version 3.10.3.0 released on October 25, 2012 10:56:13 upgradable from version 3.0.0.0

  • Added support for E-Log 2:31 which adds the modem emulation mode for transferring data via ASCII DEA550 communicator to a remote host where the program is running MiniCN;
  • Supports version 2.3.11 of the configuration library.

Version 3.10.2.1 released on October 22, 2012 11:57:58 upgradable from version 3.0.0.0

  • Minor update not released; corrects the text of the navigation menu of the configuration edit for E-Log 1.

Version 3.10.2.0 released on October 15, 2012 16:03:32 upgradable from version 3.0.0.0

  • This version corrects the error that occurs in the configuration of thel E-Log firmware version less than 2.30 when setting the serial FTP protocol.

Version 3.10.1.0 released on September 27, 2012 15:10:54 upgradable from version 3.0.0.0

  • Added support for r E-Log 2.30;
  • Supports version 2.3.11 of the configuration library;
  • Added support for GPRS communications with FTP transmission in ASCII format;
  • Added support for hardware flow control RTS / CTS.

Version 3.10.0.1 released on July 04, 2012 09:16:17 upgradable from version 3.0.0.0

  • Install the version 2.3.9 of the library that corrects the English name of some of the sensors of the internal library of R-log, and the configuration of the measurement of Tg in the KIT_2 model configuration for the calculation of the thermal environment moderate PMV.

Version 3.10.0.0 released on May 31, 2012 12:39:31 upgradable from version 3.0.0.0

  • Fixed the behavior of the program when the user presses the Cancel button after the visualization of the verification messages of the just downloaded configuration;
  • The list of the scaling parameters used by the measures has been added to the report of the configuration;
  • When you change the configuration of the instrument the program removes the reference to the last saved data which is relative to the previous configuration;
  • Supports version 2.3.8 of the configuration library;
  • Added support for r E-Log 2.21 and R-Log/M-Log/S-Log 2.11;
  • Modified and corrected some texts.

Version 3.9.0.2 released on March 5, 2012 14:33:30 upgradable from version 3.0.0.0

  • Supports version 2.3.5 of the configuration library. This version corrects the differential pressure sensors found in the internal library of R-Log. This library is used for self-programming with sensor autoconfiguration function.

Version 3.9.0.1 released on February 13, 2012 15:25:39 upgradable from version 3.0.0.0

  • Supports version 2.3.4 of the configuration library;
  • Correct assignment of the minimum value of the logic of comparison that would accept only integer values.

Version 3.9.0.0 released on January 18, 2011 16:02:44 upgradable from version 3.0.0.0

  • Supports version 2.3.4 of the configuration library;
  • Changed the library management of sensors with the inclusion of the supported firmware;
  • Added support to E-Log Firmware 2.20 and R/M-Log 2.10 that introduces SingleEnded mode for the acquisition of the probes, new calculated measures based on logics, actuators and probe battery status and the parameter to set the main power frequency.

Version 3.8.0.7 released on December 1, 2011 08:38:45 upgradable from version 3.0.0.0

  • Fixed some minor details compared to version 3.8.0.6.

Version 3.8.0.6 released on November 28, 2011 09:29:09 upgradable from version 3.0.0.0

  • Added support to ELog Firmware 2.20 that introduces SingleEnded mode for the acquisition of the sensors.

Version 3.8.0.1 released on July 28, 2011 16:54:48 upgradable from version 3.0.0.0

  • Added support for E-Log with firmware 2.13 which contains new calculated measures based on logics, actuators and probe battery status;
  • Supports version 2.2.9.0 of the configuration library.

Version 3.7.2.0 released on May 2, 2011 11:13:21 upgradable from version 3.0.0.0

  • Resolved the error that occurs after sending the library of the instrument (for versions 3.7.0.0 3DOM);
  • Solved “Read after Write” error occuring in E-Log with FW version less than 2.12.00 while sending the configuration file and when the instrument has stored elaborated data;
  • It was correct the configuration of the protocol Hydrolab on the serial 2.

Version 3.7.0.0 released on March 24, 2011 12:39:19 upgradable from version 3.0.0.0

  • Supports version 2.6.2 of the database GIDAS and version 1.3.0.0 of the program 3DOMExpress for GidasTEA that add support for cold thermal environment;
  • Adds to the function of Configuration Report the support for R-Log instruments with the terminal blocks;
  • Fixed a bug that prevented the setting of the number of repetitions for spontaneous transmission for the serial 2 of R-Log instrument;
  • Fixed a bug that prevented the update of the measures names when downloading the instantaneous data after the change of the configuration in the cases of maintaining the compatibility of the structure of the measured data.

Version 3.6.2.0 released on January 26, 2011 11:36:43 upgradable from version 3.6.0.0

  • Fixed a bug in the window for the selection of probes: in some cases selecting a category will close the window, interrupting the configuration edit;
  • Added several new configuration templates in particular have been revised templates for the calculation of the thermal environments;
  • It contains an important update of the program “Instrument Manager” used by the program GidasTEA to manage the configurations of the instruments used in the calculations of the microclimate.

Version 3.6.1.0 released on December 20, 2010 11:43:37 upgradable from version 3.0.0.0

  • Added support for R-Comm communicators;
  • Supports version 2.2.0.0 of the configuration library with the display of terminal connections;
  • Improved the form for the selection of LSI LASTEM sensors: sensors are grouped into categories and you can find a sensor from its code. It was also included the link to the sensor datasheet;
  • Added to the function of Configuration Report for E-Log and R-Log instruments: this function generates a full report on the configuration under consideration along with the necessary connections on the terminals of the instrument;
  • Supports version 2.6.2 of the database GIDAS and version 1.1.4.0 of the program 3DOMExpress for GidasTEA.

Version 3.6.0.0 released on November 15, 2010 14:33:10 upgradable from version 3.0.0.0

  • Added support for radio sensors S-Log;
  • Supports version 2.1.2.0 of the library configuration;
  • Supports version 2.6.2 of the database GIDAS and version 1.1.4.0 of the program 3DOMExpress for GidasTEA;
  • Communication parameters: now it is possible to use broadcast address when you do not know the exact network address programmed into the instrument;
  • Added a new feature that allows you to import the measures configurated on another datalogger: this feature is particularly useful to configure master datalogger with the measures configured on a slave datalogger;
  • Changed the update management of datalogger configuration: you can now update datalogger configuration without losing continuity of the data and without erasing the data stored in memory as long as the the structure of the measures was not altered;
  • Changed the wizard to insert a new datalogger for managing a datalogger that is in an undefined state following an error on sending the configuration. The wizard now allows to continue enabling manually change of the serial number fo the datalogger or assigning the one contained in the calibration file.

Version 3.5.2.0 released on October 21, 2010 16:23:17 upgradable from version 3.0.0.0

  • Added the new linearization for Tachoanemometer DNA202;
  • Added support for M/R-Log with firmware 2.0 or higher; added support for E-Log with firmware 2.11 or higher;
  • Supports version 2.0.48.0 of the library configuration and version 1.1.3.0 of the program 3DOMExpress for GidasTEA;
  • Supports version 2.6.1 of the database GIDAS: no need to upgrade from 2.6 version.

Version 3.5.1.0 released on October 11, 2010 14:16:54 upgradable from version 3.0.0.0

  • Added menu to view the quick start guides for the use of the LSI LASTEM instruments;
  • Supports version 2.0.46.0 of the library configuration and version 1.1.2.0 of the program 3DOMExpress for GidasTEA;
  • Added to the <i>Add new instrument </i> guided procedure the support of modem communication and support to the change of the user serial number.

Version 3.5.0.0 released on September 29, 2010 14:05:22 upgradable from version 3.0.0.0

  • Supports version 2.0.44.0 of the library configuration;
  • Added support for M/R-Log with firmware 2.0 or higher, added support for M-Log ELO007, ELO008 and ELO009 models;
  • Supports version 2.6 of the database GIDAS: new index on a table of data to speed up searches, support to information on instantaneous data, update databases with the programs that download the data, saving the description of the configurations during download of elaborated data.

Version 3.4.3.2 released on September 6, 2010 15:26:39 upgradable from version 3.0.0.0

  • Updated 3DOMExpressMicroclimate program used by the program GidasTEA to manage instruments;
  • Restored function to use the library to configure the measures of R-Log instrument.

Version 3.4.3.1 released on July 23, 2010 10:18:33 upgradable from version 2.0.0.0

  • Fixed a problem with the procedure of inserting a new instrument that manifests itself only on PC outdated.

Version 3.4.3.0 released on July 16, 2010 12:19:56 upgradable from version 3.0.0.0

  • Modified the wizard to insert a new instrument that no longer needs to specify the type of instrument, but identifies it when you connect;
  • Added the option to import files of binary data (downloaded from 3DOM or from mobile device): the data can be stored in all storage supported by 3DOM;
  • Added support to Windows 64 bit systems;
  • Fixed some texts;
  • Added support for CLimatronics protocol for datalogger E-Log (firmware versione 2.10);
  • Supports version 2.0.42.0 of the library configuration.

Version 3.4.2.2 released on June 16, 2010 17:01:53 upgradable from version 3.0.0.0

  • Added support for Lufft UMB protocol for datalogger E-Log (firmware versione 2.9);
  • Fixed some texts.
  • Supports version 2.0.39.0 of the library configuration;
  • Enhanced support to the models of configurations with the addition of special models used for certain calculations, such as microclimatic calculations.

Version 3.4.2.0 released on May 28, 2010 15:15:23 upgradable from version 3.0.0.0

  • Beta version not distributed: check the version 3.4.2.1

Version 3.4.1.0 released on May 13, 2010 10:26:04 upgradable from version 3.0.0.0

  • Adding storage to the size and position of windows download data;
  • Updated firmware for E-Log instrument (2.07.02), which greatly enhances the download speed of elaborated data, in particular for communication channels that have high latency (eg GSM / GPRS and Bluetooth).

Version 3.4.0.0 released on April 29, 2010 12:05:39 upgradable from version 3.0.0.0

  • Added support to R/M-Log instruments;
  • Added feature for downloading logs produced by the instrument;
  • Fixed some tests;
  • Fixed an error in managing the implementation of the time actuator in E-Log v1.1 and v1.2;
  • Fixed the error “Defined instrument type does not match the actual type” that occurs when you try to communicate with an old E-Log instruments imported from previous versions of the program;
  • Updated the configurator of the InfoGAP data storage to reflect the program behavior in Windows Vista and Windows Seven;
  • Updated the wizard to insert a new instrument and the various program windows to show the icon of the type of instrument concerned;
  • Included in the instrument registry request the verification of the current configuration: if the configuration is missing or not updated the instrument registry view screen will show it with an icon;
  • Fixed a problem in downloading the elaborated data processed: in some cases, the program allowed the download of data even when the instrument configuration on the PC did not coincide with that of the instrument;

Version 3.3.1.0 released on January 18, 2010 17:22:25 upgradable from version 3.0.0.0

  • Changed some texts and added extensive descriptions of the actuation logics;
  • Changed some texts and added extensive descriptions of the actuation logics;
  • Probes library version: 2.0.28.0;
  • Fixed the warning message that indicates the incorrect configuration of the communication protocol of the second serial port when using the protocol HYDROLAB.

Version 3.3.0.0 released on December 18, 2009 10:45:28 upgradable from version 3.0.0.0

  • Added support to E-Log instruments with firmware version 2.06 and greater: setup of communication parameters used by instrument models with internal ZigBee radio; setup of time offset for cyclic timer actuation logic; support to mobile calculated measures (arithmetic average, angular average, minimum, maximum); support to communication protocol for Hydrolab samplers;
  • Correct the management of the comparison logic that erroneously required a delay time greater than 0 seconds.

Version 3.2.0.0 released on November 9, 2009 00:00:00 upgradable from version 3.0.0.0

  • Correct the management of the comparison logic that, in some circumstances, it was not programmable;
  • Changed the save template configuration dialog to remove the limit to 30 characters also present in the extended description;
  • Added a new data storage for saving elaborated data in a binary file;
  • Added some missing descriptions in the setting window of the calculated measures;
  • Improved management of the modem;
  • Inserted the View menu ‘Restore Layout’ that restores the default layout of the program;
  • Changed the window of connection to the database Gidas to comply with the new version of the program Gidas Viewer;
  • Added save partially downloaded data in case of errors in communication with the instrument;
  • Modified the setup program to make it compatible with Windows 7;

Version 3.1.0.0 released on July 30, 2009 09:21:27 upgradable from version 3.0.0.0

  • Replaced the component TAPI for the management of the modem;
  • Corrected the management of the user interface in computer with international settings with different separators for the numbers and for the currency.

Version 3.0.2.0 released on June 11, 2009 13:02:29 upgradable from version 3.0.0.0

  • Modified the management of the insertion of a new instrument in Vista for avoiding an error of protection of the system;
  • Localized some windows titles in italian language;
  • Restored the access to the change of the linearization parameters for instrument of class ELog 1.x.

Version 3.0.1.0 released on June 8, 2009 10:51:42 upgradable from version 3.0.0.0

  • It was corrected the management of the power up of the GSM modem when it is powered with actuator.

Version 3.0.0.0 released on March 19, 2009 16:18:40 upgradable from version 3.0.0.0

  • Added the possibility to manually modify the date of the last downloade elaborated data in the principal panel of the program through a voice of the contextual menu;
  • Corrected the saving error of the parameters of communication when a computer doesn’t have serial ports;
  • It is possible to download the configuration of an instrument also when it results already downloaded;
  • In the edit of a configuration it is possible to create a new measure beginning from an existing one;
  • Saved the state of visualization of the list of the instrument;
  • Inserted in the instrument satet window the button for the reset of the instrument;
  • Added new calculated measures;
  • Addedd the zigbee protocol support;
  • Inserted a control to prevent the closing of the program with a communication by modem in progress;
  • It is possible to insert two serial probes with the same id (useful for AEROQUAL probes);
  • New version with general improvements to the functionalities and the user interface;

Added the visualization of the version of the library.