Thermo-Hygrometer

Description


Accurate and reliable, these temperature and relative humidity sensors are suitable for continuous meteorological measurements, even under harsh climatic conditions. The interchangeable measuring probe ensures high sensor reliability. The sensor family includes models with analog and digital outputs, which can be configured via software. The multi-parameter sensor also enables onboard calculation of derived parameters. For outdoor applications, the sensors must be protected by a radiation shield.

Models with integrated pressure measurement are also available: https://lsi-lastem.com/products/thermo-hygro-barometer/


  • Family of temperature and relative humidity sensors;
  • Measuring probe di misura interchangeable;
  • Fast recovery after humidity saturation thanks to a self-heating algorithm;
  • Output configuration through easily adjustable parameters;
  • Calculated parameters onboard the sensor;
  • High efficiency radiant screen;
  • Available forced-ventilation radiation shield;
  • Traceable to ISO 17025.
  • Model codes: PRTHL1000, PRTHL1001, PRTHL1100, PRTHL1101, PRTHL1200, PRTHL1201, PRTHL1300, PRTHL1301.

  1. High accuracy for both environmental parameters

The PRTHL family provides accuracy levels of up to:

  • ±0,1 °C for air temperature;
  • ±1% RH for relative humidity;

An intelligent self-heating algorithm for the sensing element also promotes rapid recovery of measurement capability after humidity saturation.

  1. Easy integration into different data acquisition systems

PRTHL sensors feature software-configurable analog and digital outputs and support numerous communication interfaces, including mV, 4–20 mA, UART, RS-232, RS-485 and SDI-12.

The different available configurations allow users to select the model best suited to their specific measurement requirements, from temperature and humidity monitoring to complete temperature, humidity and barometric pressure measurement.

  1. Faster maintenance directly in the field

The pre-calibrated interchangeable measuring probe can be replaced without removing the entire sensor from the installation. This solution simplifies maintenance, reduces intervention times and limits system downtime.

  1. Derived parameters calculated onboard the sensor

In addition to measured parameters, the PRTHL family can directly calculate numerous derived environmental parameters, even without an external data logger.

These include Absolute Humidity (VDI3786 Part 4), Dew Point (ISO7726), Heat Index (National Oceanic and Atmospheric Administration (NOAA)), Wet Bulb Temperature calculated from air temperature and relative humidity (ROLAND STULL, University of British Columbia).


In which applications are air temperature and humidity measured?

Air temperature and relative humidity are essential parameters in meteorological and climatological stations, agrometeorological monitoring, renewable energy plants and urban environmental networks. They are also measured at airports, along road networks, at industrial sites and in research activities to describe air conditions, correctly interpret other environmental parameters and monitor phenomena influenced by heat and moisture exchange. Continuous measurement makes it possible to track daily and seasonal variations as well as changes associated with weather events.

What are the main advantages of the thermo-hygrometer?

The thermo-hygrometer combines high accuracy, measurement stability and configurability, maintaining reliable performance even under demanding climatic conditions. It also calculates various derived parameters directly onboard from temperature and relative humidity, providing processed data without relying on the data logger for all calculations. Rapid recovery after saturation and the interchangeable sensing probe complete a solution designed for continuous monitoring and easier long-term management.

How is a thermo-hygrometer integrated into a weather station?

The sensor is available with different output signals and can be connected to LSI LASTEM data loggers or integrated into third-party data acquisition systems. This flexibility makes it easy to use in new weather stations as well as when replacing or upgrading sensors in existing installations. In outdoor applications, the thermo-hygrometer must be installed in a naturally or forcibly ventilated radiation shield to obtain representative air measurements.

How does the interchangeable probe simplify maintenance and calibration?

The temperature and humidity sensing probe can be replaced without changing the entire sensor. This allows quick intervention on the component most subject to drift, reducing downtime and simplifying the restoration of metrological performance. Air temperature and relative humidity can also undergo periodic checks and calibrations with metrological traceability at the ISO/IEC 17025-accredited LSI LASTEM laboratory.

Additional information

Applications

, , , , , , , , ,


Accurate and reliable, these temperature and relative humidity sensors are suitable for continuous meteorological measurements, even under harsh climatic conditions. The interchangeable measuring probe ensures high sensor reliability. The sensor family includes models with analog and digital outputs, which can be configured via software. The multi-parameter sensor also enables onboard calculation of derived parameters. For outdoor applications, the sensors must be protected by a radiation shield.

Models with integrated pressure measurement are also available: https://lsi-lastem.com/products/thermo-hygro-barometer/


  • Family of temperature and relative humidity sensors;
  • Measuring probe di misura interchangeable;
  • Fast recovery after humidity saturation thanks to a self-heating algorithm;
  • Output configuration through easily adjustable parameters;
  • Calculated parameters onboard the sensor;
  • High efficiency radiant screen;
  • Available forced-ventilation radiation shield;
  • Traceable to ISO 17025.
  • Model codes: PRTHL1000, PRTHL1001, PRTHL1100, PRTHL1101, PRTHL1200, PRTHL1201, PRTHL1300, PRTHL1301.

  1. High accuracy for both environmental parameters

The PRTHL family provides accuracy levels of up to:

  • ±0,1 °C for air temperature;
  • ±1% RH for relative humidity;

An intelligent self-heating algorithm for the sensing element also promotes rapid recovery of measurement capability after humidity saturation.

  1. Easy integration into different data acquisition systems

PRTHL sensors feature software-configurable analog and digital outputs and support numerous communication interfaces, including mV, 4–20 mA, UART, RS-232, RS-485 and SDI-12.

The different available configurations allow users to select the model best suited to their specific measurement requirements, from temperature and humidity monitoring to complete temperature, humidity and barometric pressure measurement.

  1. Faster maintenance directly in the field

The pre-calibrated interchangeable measuring probe can be replaced without removing the entire sensor from the installation. This solution simplifies maintenance, reduces intervention times and limits system downtime.

  1. Derived parameters calculated onboard the sensor

In addition to measured parameters, the PRTHL family can directly calculate numerous derived environmental parameters, even without an external data logger.

These include Absolute Humidity (VDI3786 Part 4), Dew Point (ISO7726), Heat Index (National Oceanic and Atmospheric Administration (NOAA)), Wet Bulb Temperature calculated from air temperature and relative humidity (ROLAND STULL, University of British Columbia).


In which applications are air temperature and humidity measured?

Air temperature and relative humidity are essential parameters in meteorological and climatological stations, agrometeorological monitoring, renewable energy plants and urban environmental networks. They are also measured at airports, along road networks, at industrial sites and in research activities to describe air conditions, correctly interpret other environmental parameters and monitor phenomena influenced by heat and moisture exchange. Continuous measurement makes it possible to track daily and seasonal variations as well as changes associated with weather events.

What are the main advantages of the thermo-hygrometer?

The thermo-hygrometer combines high accuracy, measurement stability and configurability, maintaining reliable performance even under demanding climatic conditions. It also calculates various derived parameters directly onboard from temperature and relative humidity, providing processed data without relying on the data logger for all calculations. Rapid recovery after saturation and the interchangeable sensing probe complete a solution designed for continuous monitoring and easier long-term management.

How is a thermo-hygrometer integrated into a weather station?

The sensor is available with different output signals and can be connected to LSI LASTEM data loggers or integrated into third-party data acquisition systems. This flexibility makes it easy to use in new weather stations as well as when replacing or upgrading sensors in existing installations. In outdoor applications, the thermo-hygrometer must be installed in a naturally or forcibly ventilated radiation shield to obtain representative air measurements.

How does the interchangeable probe simplify maintenance and calibration?

The temperature and humidity sensing probe can be replaced without changing the entire sensor. This allows quick intervention on the component most subject to drift, reducing downtime and simplifying the restoration of metrological performance. Air temperature and relative humidity can also undergo periodic checks and calibrations with metrological traceability at the ISO/IEC 17025-accredited LSI LASTEM laboratory.

Related Products